Vertical rubber injection machine although it has many advantages, but you should know that when operating, it is also accompanied by a lot of matters to pay attention to, because most people are not very clear, so the next xiaobian will introduce where we need to pay attention to when using.
Vertical rubber injection machine although it has many advantages, but you should know that when operating, it is also accompanied by a lot of matters to pay attention to, because most people are not very clear, so the next xiaobian will introduce where we need to pay attention to when using. If you want to know, you should check it out. I hope it helps.
Vertical rubber injection machine is also a large equipment, if you do not understand, do not operate, the staff before using to do is to check whether there is water and oil in the electrical control box, if the electrical appliances are damp, do not turn on. The electrical parts should be blow-dried by maintenance personnel before starting up. Then go to check.
Vertical rubber injection machine voltage is consistent with, generally should not be greater than ±15%. On its emergency stop switch, the front and back door switch is also to check. In addition, there is verification of motor and oil pump rotation direction is consistent. For each cooling pipe is smooth, and the oil cooler and the cooling water sleeve at the end of the barrel into the cooling water. Whether there is lubricating oil (grease) in each moving part, and add enough lubricating oil. Turn on the electric heating, heating each section of the barrel. When the temperature reaches the requirements, heat preservation for a period of time, so that the machine temperature tends to be stable. Insulation time depends on different equipment and gold. These are the things to do before using the vertical rubber injection machine. It is also necessary to check some places. If there is a problem, it is necessary to stop using it immediately.
In addition, we also need to know that some matters to pay attention to in the process of operation, the staff should pay attention to when using the vertical rubber injection machine not for convenience, arbitrarily cancel the role of the door. Also need to observe the pressure oil temperature, oil temperature should not be greater than the specified range. The ideal working temperature of hydraulic oil should be kept between 45 and 50 deG C, generally within the range of 35 to 60 deG C is more appropriate. Pay attention to adjust the limit switch of each stroke to avoid collision when the machine is in action. Then it is the place to pay attention to after the vertical rubber injection machine runs. After use, the metal in the barrel should be cleaned up to prevent oxidation or long-term thermal decomposition of the remaining material. The mold also needs to be opened so that the toggle mechanism is locked for a long time. The workshop is equipped with lifting equipment. When assembling and disassembling heavy parts such as molds, great care should be taken to ensure safe production. As long as you read this article carefully, then there will be no problems in the future when running. This can also prolong the service life of the vertical rubber injection machine. Still don't understand the place can come to consult us at any time.
To sum up, you will find that there are still a lot of places to pay attention to when using the vertical rubber injection machine. After all, it is a large equipment, and every place should be checked and paid attention to. As long as these words can be used for a longer time.
